Golf Gifts Information And More
Our Featured Golf Writer
If you want a great golf swing then get this Simple Golf Swing eBook
Cast Iron Golf Clubs Or Forged?
By: Lee MacRae
With a larger variety of golf clubs coming onto the scene every week, it can become more and more difficult to determine just exactly what you should be looking for when buying new clubs.
Follow along as we discuss each type and what may be best for you.
First, take note of your height. Standard golf clubs are designed for individuals bewteen five and six feet. And that holds equally for males and females. If you are taller or shorter than those measurements, then you may have to consider looking for custom made clubs.
Cast or Forged Clubs?
For just about all golfers, the standard cast iron golf clubs are the right choice.
And there is a reason for that. Because most standard cast iron golf clubs have a larger "sweet spot". The trem refers to the best area on the club face that will give you the maximum range and accuracy on a shot. The bigger the sweet spot, the better chance of hitting well it every time. You can still be a little "off center" and the ball is still struck well because you have a larger margin of error. This makes cast iron clubs ideal for anyone who wants a more consistant shot., especially beginners. Without a steady consistant swing, a larger striking area will produce better shots overall. This is the major reason why you see larger or even "oversized" clubs made, especially the oversized drivers today. These clubs allow for a larger sweet spot and make the game a lot easier for the average player
Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.
So why are forged clubs even made?
Because the "softer" forged metal gives the golfer a better feel than the harder cast iron does. The better player, with a more refined and "repeatable" swing, can use this "feel" to shape or control his shot in a way that the beginner can't. The better player doesn't need that larger sweet spot because he can strike the ball dead center with far more consistancy. He trades that off for more control.
The shaft of the club is your next thing to look at. Specifically the material it will be made from. Basically, you have steel or composite shafts
The significant factor here is club head speed. A typical golfer will have a club velocity between 80-94 mph. A slower swing speed means you had better think of using a shaft made from composite material, not steel. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite shaft material comes in. The composite shaft will give you longer drives than you will normally get with your low swing speed and steel shafted golf clubs.
For those of you with faster swing speeds, and subsequenlty good distances, steel shafted clubs will give you a lot more control on your shots. This is very similar to the advantages of iron over cast clubs.
Determining your own swing speed is not difficult. If you don't have a local pro shop with the right equipment, you can find small microwave Doppler radar devices that are run by AAA batterieson the market. You simply set it near your tee and swing away.
With just a few small tips like this, you should be able to determine which clubs will work for you and why. Knowing why is just a important because you will be able to adjust your equipment as you improve on your game over time. If you find your swing speed improving, you may find you will be able to switch to clubs that will give you the feel and shot selection of the better players.
If you implement these tips and work on them, you will be certain to develop a better drive within a short period of time. Just keep on practicing and working on your improvement. It's only a matter of time before your scores begin to drop.
Lower your scores with a good golf putting aid today!
Golf Snippets
Two Backswing Flaws You Must Fix for a Spot-On Swing
Because golfers must stand to the side of the golf ball at address, it's easy to understand why many players improperly rotate both the body and golf club away from the ball during the takeaway. Often, this improper rotation assumes the form of an inside takeaway, where the hands and forearms roll clockwise and rotate the clubface open. As soon as the club is taken too far to the inside, it becomes trapped behind the body�literally.
...Golf Link
When you want to get some extra distance out of your drives, it�s natural to think that your right or dominant hand (for right-handed golfers) should supply the power. In reality, however, maximum power is a result of a left-hand lead.
...The Golf Channel
Handle Leads Hands
The body should continue to move the arms through impact and into the finish. Don't allow the clubhead to pass the handle of the club until well past impact.
...Golf Tips magazine
To keep other body movements from moving the swing center keep your weight to the inside of your feet. Never allow this weight to transfer outside as this will pull you out of position. Allow the rotation of the shoulders and arms to carry the club to the top of the backswing. These are some key points that will give you feedback in understanding how to feel the proper swing center.
...PGA
Control Your Distance
A proper divot is taken just beyond impact, but it should be shallow. Shallow divots allow you to hit your clubs consistent distances, while deep ones don't.
...Golf Tips magazine
Headline News About Golf
Adam Scott Delivers Signature Performance in TOUR Championship Victory.
Mon, 06 Nov 2006 00:00:00 GMT
Q&A answers
Sat, 12 Apr 2008 17:30:58 GMT
The BBC Sport golf team at Augusta answer your questions
custom golf balls | clone golf clubs | discount golf
posted by Duffer @ 11:23 PM
0 comments
